TESTO 845 - Instrument Setting and Configuration; Basic Instrument Configuration

96. Setting instrument
3
Setting ddisplay iillumination:
 The configuration menu is open, °C is displayed.
i Go to menu Display illumination On/Off with .
Select the desired option with / and confirm with .
.
ºContinue with SET CONTINUOUS MEASUREMENT.
4
Setting ccontinuous mmeasurement
(see also Chapter 8. Measuring)
:
 The configuration mode is open, °C is displayed.
i Go to menu Auto on/off with (2x).
Select the desired option with / and confirm with .
The laser function is not available during continuous measurement.
º Continue with handling objective SETTING LASER.
5
Setting llaser:
 The configuration mode is open, °C is displayed.
i Go to menu Laser on/off with (3x).
Select the desired option with / and confirm with .
º Continue with handling objective SETTING DATE.
6
Setting ddate:
 The configuration mode is open, °C is displayed.
i Go to menu Setting date with (4x).
Setting day: Select the desired day with / and confirm with .
Setting month: Select the desired month with / and
confirm with
.
Setting year: Select the desired year with
/
and confirm with .
º Continue with handling objective SETTING TIME.
7
Setting ttime:
 The configuration mode is open, °C is displayed.
i Go to menu Setting time with (7x).
Setting hour: Select the desired hour with / and confirm with .
Setting minute: Select the desired minute with / and confirm
with .
º Continue with handling objective
ADJUSTING HUMIDITY MODULE AT 11.3 AND 75.3
%RH (only with integrated humidity module)
.