8
5.2 Switching on / off
²
Switching iinstrument oon:
i Press measurement trigger and hold down
- The measurement display is opened: The current measurement value
and the min. / max. values are displayed
²
Switching iinstrument ooff:
i The instrument switches off automatically after 10 s if no button is
pressed.
6. Setting instrument
This chapter describes the handling steps required to adapt the measuring
instrument for special measurement tasks.
6.1 Instrument configuration
The basic settings for the measuring instrument are carried out in the configu-
ration menu.
The configuration mode can be exited at any time. To do this, press .
Instrument switches to measurement display. Changes already applied
with in the configuration mode are saved.
1
Opening cconfiguration mmode:
The instrument is switched on and is in measurement display.
i Hold down measurement trigger and briefly press : °C is displayed.
- The instrument is now in configuration mode.
2
Setting ttemperature:
The configuration mode is open, °C is displayed.
i Set °C/°F with / °C/°F and confirm with .
The setting is applied with and the instrument jumps to the next func-
tion.
º Continue with handling objective SETTING DISPLAY ILLUMINATION.
5. Operation
To Next Page
Loading...
Need help?
General
