26
611 - 612
GB
INSTRUCTIONS
ECONOMY
This function can be used to programme the
deactivation of the heater for a given period of time (e.g.
during the night).
Press the “Economy” button a first time to set the
duration of the Economy period (when the heater
remains off).
The display shows E OO.
Use buttons “
▲
” and “
▼
” to set the duration (from 0
to 24 hours).
Press “Economy” a second time to set the delay before
the Economy function cuts in (number of hours
between the time of programming and the time the
Economy period is due to start).
The display shows Ed OO.
Use buttons “
▲
” and “
▼
” to set the delay (from 0 to 23
hours).
Press the “Economy” a third time to terminate the
programming procedure.
E 00
E800
FILTER
This function is used to programme the number of
filtration cycles for the following 24 hours.
Press the “Filter” button; the display shows P O1.
Use buttons “
▲
” and “
▼
” to set the number of cycles
(1, 2, 3, 4, 6, 8, 12, 24).
-To start the first filtration
immediately press “Filter” a
second time.
The filtration cycle lasts for 2 minutes with activation
of the Pump 1, Pump 2 and Blower functions.
- To set the system so that filtration does
not start
immediately, press “Filter”, “
▲
” and “
▼
” and hold
for 5 seconds.
P 0 1
To Next Page
Loading...
