27
615
GB
MAINTENANCE
Every two weeks the message CLE will blink in the
display, indicating that the filters need cleaning.
Clean the filters more often if need be.
To clean the filters:
- select "OFF MODE" at the control panel,
- unscrew the caps of the filters and remove them
from their sockets.
Clean the filters under a strong jet of water (use a
high pressure hose if necessary).
Replace the filters at the first signs of any
deterioration.
Replacement filters are available from Teuco
Authorized Dealers.
Having cleaned or replaced the filters, refit all
components before restarting the minipool.
To restart the minipool, deselect the “OFF
MODE” function at the control panel.
CLEANING THE FILTERS
08:30
Refer to the CLEANING INSTRUCTIONS manual accompanying the product.
CLEANING THE SURFACES
If the pool is fitted with wood panels, carry out annual maintenance using proprietary products
formulated specifically for wood.