Using TICS Pro to Program the LMK0482x
www.ti.com
12
SNAU145B–MAY 2013–Revised March 2018
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
LMK04826 and LMK04828 User’s Guide
Figure 7. Selecting the LMK04828B
5.3 Program/Load Device
Press “Ctrl+L”
Alternatively, click “USB communications” → “Write All Registers” from the menu to program the device to
the current state of the newly loaded LMK04828 file. “Ctrl+L” is the accelerator key assigned to the “Write
All Registers” option and is very convenient.
Once the device has been loaded, by default TICS Pro will automatically program changed registers, so it
is not necessary to load the device again completely. It is possible to disable this functionality by ensuring
there is no checkmark by the “Options” → “AutoUpdate”.
Figure 8. Loading the Device
To Next Page
Loading...
