EVALUATION BOARD/KIT IMPORTANT NOTICE
Texas Instruments (TI) provides the enclosed product(s) under the following conditions:
This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION,
OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for
general consumer use. Persons handling the product(s) must have electronics training and observe good
engineering practice standards. As such, the goods being provided are not intended to be complete in
terms of required design–, marketing–, and/or manufacturing-related protective considerations, including
product safety and environmental measures typically found in end products that incorporate such
semiconductor components or circuit boards. This evaluation board/kit does not fall within the scope of the
European Union directives regarding electromagnetic compatibility, restricted substances (RoHS),
recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these
directives or other related directives.
Should this evaluation board/kit not meet the specifications indicated in the User's Guide, the board/kit
may be returned within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY
IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the
user indemnifies TI from all claims arising from the handling or use of the goods. Due to the open
construction of the product, it is the user's responsibility to take any and all appropriate precautions with
regard to electrostatic discharge.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE
LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES.
TI currently deals with a variety of customers for products, and therefore our arrangement with the user is
not exclusive.
TI assumes no liability for applications assistance, customer product design, software performance, or
infringement of patents or services described herein.
Please read the User's Guide and, specifically, the Warnings and Restrictions notice in the User's Guide
prior to handling the product. This notice contains important safety information about temperatures and
voltages. For additional information on TI's environmental and/or safety programs, please contact the TI
application engineer or visit www.ti.com/esh .
No license is granted under any patent right or other intellectual property right of TI covering or relating to
any machine, process, or combination in which such TI products or services might be or are used.
FCC WARNING
This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION,
OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for
general consumer use. It generates, uses, and can radiate radio frequency energy and has not been
tested for compliance with the limits of computing devices pursuant to part 15 of FCC rules, which are
designed to provide reasonable protection against radio frequency interference. Operation of this
equipment in other environments may cause interference with radio communications, in which case the
user at his own expense will be required to take whatever measures may be required to correct this
interference.
Mailing Address
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
To Next Page
Loading...
Need help?
General
