Texas Instruments TI-83-Plus - TI-83 Plus Specific Information; ARCHITECTURE

TI-83 Plus GeoMaster™ Application Page 13

Save the drawing, clear the screen, and then open the file you
created.
1. Press
V
to display the menu bar.
2. Select
FILE
(press
R
), and then select
Save File
. The New
Filename prompt is displayed. The top right corner displays
the alpha-lock icon.
Tip
If other GeoMaster™ files have been saved previously, a dialog
box lists the names of the GeoMaster files, as well as New
Filename. Press
¯
to select New Filename.
.
3. Enter a file name, and then press
¯
. The drawing is
saved as an application variable (AppVar) with the name you
entered.
4. Press
V
to display the menu bar.
5. Select
FILE
, and then select
Clear All
to clear the screen.
Alpha-lock icon
Press
e
to turn the
alpha-lock off so that you
can enter numbers.