Texas Instruments TI-83-Plus User Guide

TI-83 Plus GeoMaster™ Application Page 31
Drawing an Arc
1. Select
Arc
from the
DRAW
menu.
2. Place the cursor at the beginning point of the arc.
3. Press
¯
.
4. Move the cursor to the arc’s second point.
5. Press
¯
.
6. Move the cursor to the arc’s third point.
7. Press
¯
, and then move the cursor away from the arc.

Texas Instruments TI-83-Plus Specifications

General

Brand	Texas Instruments
Model	TI-83-Plus
Category	Calculator
Language	English