Texas Instruments TI-83-Plus - Drawing a Polygon

TI-83 Plus GeoMaster™ Application Page 28
5. Move the cursor to draw the second segment, and then
press
¯
to place the third point of the triangle.
6. Press
¯
or move the cursor to draw the final segment.
Drawing a Polygon
1. Select
Polygon
from the
DRAW
menu.
2. Use the arrow keys to move the cursor to the beginning point
for the polygon.
3. Press
¯
.
4. Move the cursor to draw the first segment of the polygon.
5. Press
¯
to place the second point.
6. Continue to draw segments, pressing
¯
after each
segment is complete to place a point.
7. Press
¯
to complete the polygon.