Texas Instruments TI-83-Plus - Variable Naming Conventions

TI-83 Plus GeoMaster™ Application Page 26
3. Press
¯
.
4. Use the arrow keys to move the cursor away from the
beginning point and draw the line.
5. Press
¯
, and then move the cursor away from the line.
Drawing a Segment
1. Select
Segment
from the
DRAW
menu.
2. Use the arrow keys to move the cursor to the beginning point
for the segment.
3. Press
¯
.
4. Use the arrow keys to move the cursor to the ending point
for the segment.
5. Press
¯
, and then move the cursor away from the
segment.