Texas Instruments TI-Nspire CX II-T User Manual

2. Press 1 to select the custom split option.
The standard layout is displayed with a divider between the application panes. Use
the arrows ( ) in the middle of the divider to adjust the size of the panes.
3. Press £,¤,¡or¢ to move the divider to adjust the height or width of the panes in
the layout.
4. Press + or - to select a defined layout:
• Pressing - returns to a full page layout.
• Pressing + once switches layout from a vertical layout to a horizontal layout.
Press - to go back to a vertical layout.
• Pressing + twice adds a third pane to the page. Pressing + multiple times
enables you to choose between a vertical and horizontal page layout with three
panes.
• Pressing + five times adds a fourth pane to the page. Press - to cycle
through the previous layout options.
Working with Documents on TI-Nspire™ CX II Handhelds 33

Texas Instruments TI-Nspire CX II-T Specifications

General

Battery	Rechargeable Lithium-ion
Operating System	TI-Nspire OS
Programming	TI-Basic, Lua
Type	Graphing Calculator
RAM	64 MB
ROM	128 MB
Model	TI-Nspire CX II-T
Display	320 x 240 pixels
Connectivity	USB
Processor	ARM9
Certification	SAT, ACT, AP, IB, PSAT/NMSQT
Memory	64 MB RAM
Weight	269 g