Texas Instruments TI-Nspire CX II-T User Manual

66 Configuring Handhelds
Exact Arithmetic OS CAS OS
2. Press eto move through the list of settings. Press £ to move backward
through the list.
A bold line around a box indicates it is active.
3. When you reach the desired setting, press ¢to open the drop-down list to view
values for each setting.
4. Press the 5 and 6 keys to highlight the desired option, then press xor· to
select the value.
5. Click OK or press xor·to apply the new settings to the open document, and
to set as the default for new documents and Scratchpad.
Restoring Document Settings
Complete the following steps to restore the original factory settings to open or new
documents, and to the Scratchpad.
1. From the Home screen, press 5 8 (Settings > Restore Factory Defaults).
The Restore Defaults dialogue box opens.
2. Click OK to restore settings to the factory default settings.
3. Press d or click Cancel to return to the Home screen without making changes.

Texas Instruments TI-Nspire CX II-T Specifications

General

Battery	Rechargeable Lithium-ion
Operating System	TI-Nspire OS
Programming	TI-Basic, Lua
Type	Graphing Calculator
RAM	64 MB
ROM	128 MB
Model	TI-Nspire CX II-T
Display	320 x 240 pixels
Connectivity	USB
Processor	ARM9
Certification	SAT, ACT, AP, IB, PSAT/NMSQT
Memory	64 MB RAM
Weight	269 g