Compiler
Installation
-
UNIX
Systems
2.3
Installing
the
C
Compiler,
on
UNIX
Systems
2-4
The TMS3401 0 C compiler product tape was made at
1600
BPI using the
tar
utility. Follow these instructions to install the compiler:
1)
Mount
the tape on your tape drive.
2) Make sure that the directory that
you'll store the tools in
is
the current
directory.
3) Enter the
tar
command for your system; for example,
tar
x
This copies the entire tape into the directory.
Note
to
Apollo
Users:
These tools can run under either the AEGIS system or Domain/IX.
How-
ever, when you install the tools, you must use Domain/IX because the tape
is
in tar format and only Domain/IX
has
a tar command.
If
you
are
not
ac-
customed
to
using Domain/IX, you can run the tools under AEGIS after
they
are
installed.
To Next Page
Loading...
Need help?
General
