72
NOTE: When the robot lawn mower moves to an area of your lawn with poor or no Wi-Fi
signal, commands sent from the App will only be executed when the mower returns to an
area with good Wi-Fi signal.
The Bluetooth icon will only light up when the phone is near the robot and connected. The
robot can be controlled over Wi-Fi, even if you are away from home, if the coverage is ok.
17. Using the App
Using the App provides extended functions compared to operation via the robot's display.
The most important features are reviewed here.
Note: The App is automatically updated with new features, which is not described in this
user manual. Check the App for details.
Home
When you are logged in and have selected the robot, you are on the home screen, where
you have an overview of the robot, its battery status, whether it has Wi-Fi / Bluetooth
connection and whether the robot is in standby mode or working.
Further down there are 4 round buttons: RETURN - WORK - EDGE - STOP
• If the robot is running and you want it to drive home, first press STOP, and then
"RETURN".
• If you want to start the robot manually, first press STOP (so that the WORK button
turns white) and then "WORK".
• If you want to start the robot with edge cutting mode first, press EDGE.
This function only works when robot is parked in the charging station.
• The STOP button must generally be pressed first before you can select RETURN or
WORK.
Battery health
Note that the battery state will typically show 9X% (and not 100%) and that it will slowly
decrease. This is completely normal and is done to protect the battery and extend its
lifetime (it is not optimal for the battery to be charged 100% all the time). The charging
station will start charging the battery again once it gets below 90%.
To Next Page
Loading...
