Premier Series User Guide Operating the Alarm System
INS221 5
To ARM Individual Areas
If the system has been split up into separate areas of protection i.e. Area 1 = House,
Area 2 = Garage, Area 3 = Shed etc. These areas can be individually selected for FULL
or PART arming as required.
!"
Areas are selected by using keys
!
-
.
(the
/
key can also be used to
select an area followed by
'
or
+
).
Only areas that exist on the system can be selected. (A ‘Star’ means the area can
be selected and a ‘Dot’ means the area cannot be selected).
Pressing
0
will select/deselect all areas, pressing
'
will toggle between the
first 8 areas and the second 8 areas (where applicable).
1. Ensure that the premises are secure (all windows and doors not being omitted are
closed) and the Ready light is on
2. Enter a valid User code
,,,,
3. Press
'
4. Use keys
!
-
.
to select the required areas
5. Press
*
or
-
to FULL arm the areas
Or
5. Press
)!
,
(
or
"
followed by
*
or
-
to PART arm the areas
The exit tone will sound (if silent arm has not been selected)
6. Leave the premises
When the system has armed, the exit tone (if sounding) will stop
To DISARM the System
The entry time is divided into two sections, the Entry time and the 2
nd
Entry time. If the
Entry time expires, an Internal alarm will occur and the 2
nd
Entry time will start. If the 2
nd
Entry time expires, an Intruder alarm will occur (all internal and external sounders).
!"
It is perfectly normal for the 2
nd
Entry time to be programmed as zero, in which
case, an Intruder alarm will occur as soon as the Entry time expires.
1. Enter the premises via the designated entry point
The entry tone will start
2. Enter a valid User code
,,,,
The entry tone will stop
To Next Page
Loading...
Need help?
General
