Premier 412/816/832 Quick Guide
6 INS184-8
Communicator Programming
Menu:
Communicator Options
1: Enable On-Board Communicator
2: Enable DTMF Dialling
3: Switch to Pulse Dialling after 3
rd
Attempt
4: Enable European Pulse Dialling
5: Enable Auto Test Transmission
6: Enable Cancel Call Waiting
7: Enable Backup to Receiving Centre
8: Enable Blind Dialling
Menu:
ARC 1 Options & Menu:
ARC 2 Options
Telephone Numbers Primary: Secondary:
Account Numbers
Partition 1
Partition 2
Partition 3
Partition 4
Protocol Type
0 = Disabled
1 = Pulse Format
2 = Express Format
3 = Fast Format
4 = Contact ID
5 = SIA Level 2/3
6 = Pager
7 = Mobile Phone
Dial Attempts
Partition Options
1: Report for Partition 1
2: Report for Partition 2
3: Report for Partition 3
4: Report for Partition 4
Reporting Options
1: Priority Alarm and Cancel Events
2: Alarm and Cancel Events
3: Open and Close Events
4: Bypass and Unbypass Events
5: Maint. Alarm Events
6: Tamper Alarm Events
7: Test Tx Events
8: Restore Events
Pulse Options
1: Use 1900Hz Carrier
2: Use 40 PPS Baud Rate
3: Enable Parity
4: Use 2 Digit Events
5: Use 2300Hz Handshake
6: Use 2300Hz Kiss-Off
7: Use Fast/Slow Format
8: Reserved
Fast Format Channels
1: Channel 1
2: Channel 2
3: Channel 3
4: Channel 4
5: Channel 5
6: Channel 6
7: Channel 7
8: Channel 8
Protocol Options
1: Disable SIA Modifier Blocks/ Enable
Speech Module
2: Disable Events for Each Partition
3: Pager Terminator = * (Star)
4: Send Pager Terminator Twice/SIA Text
5: Pager DTMF Tones = 500mS
6: Disable Zone Restorals
7 : Comms Ack. Tone
8: Connect via IP
Menu: Fast Format Restore Channels Menu: Fast Format Open/Close Channels
1: Report Restore on Channel 1
2: Report Restore on Channel 2
3: Report Restore on Channel 3
4: Report Restore on Channel 4
5: Report Restore on Channel 5
6: Report Restore on Channel 6
7: Report Restore on Channel 7
8: Report Restore on Channel 8
1: Report Open/Close on Channel 1
2: Report Open/Close on Channel 2
3: Report Open/Close on Channel 3
4: Report Open/Close on Channel 4
5: Report Open/Close on Channel 5
6: Report Open/Close on Channel 6
7: Report Open/Close on Channel 7
8: Report Open/Close on Channel 8
Menu: Cancel Call Waiting Sequence