Premier 48, 88, 168 & 640 Installation Manual System Overview
INS176 5
Premier 48, 88, 168 and 640
• 8 programmable digicom outputs (100mA each)
• 32 character zone text
• Facility for Plug-on Digimodem (Com300/2400/ComISDN)
• Facility for Plug-on Paknet RP9 Radio-Pad
• Facility for Plug-on GSM Module
• Facility for Plug-on IP Module (ComIP/Chiron/WebWayOne)
• Facility for a plug-on RedCARE/RM8 Relay Module
• PC-Com/printer port
Remote Keypads
Premier LCD
• 32 character text display
• 2 fully programmable DP or EOL zones
• 1 fully programmable output (100mA -ve applied)
• Fully adjustable back-lighting, normally bright, dim or off,
changing to bright during entry or following a key press
• Built in piezo sounder
• Programmable ‘Info.’ LED
Premier LCDL
ALL the features of the Premier LCD plus:
• Larger 32 character text display
• Speaker output
Premier LCDP
• Premier LCD with a built in Proximity Tag Reader
Premier LCDLP
• Premier LCDL with a built in Proximity Tag Reader
Premier RKP8/16Plus
• LED Arming keypad
• 2 fully programmable EOL zones
• CANNOT be used for Programming
Zone Expanders
Premier 4XP
• 4 fully programmable DP or EOL zones
• 2 fully programmable outputs (100mA -ve applied each)
• Remotely wired
Premier 8XP
• 8 fully programmable DP or EOL zones
• 8 fully programmable outputs (100mA -ve applied each)
• Speaker output
• Programmable auxiliary input
• Remotely wired
Premier 60iXD
• 2 loops x 30 fully programmable iD zones
• iD biscuit technology
• Plug-on
“iD” is a registered trade mark of Chloride Safety System Limited.
Output Expanders
Premier OP16
• 16 fully programmable outputs (100mA each)
• 1 fault output (100mA -ve applied)
• Can be connected to mimic panels to give zone indication
• Can be connected to relays and sounders
Premier RM8 Relay Module
• Plug-on relay card (RedCARE footprint)
• 8 separate inputs for stand alone operation
• 8 x 3Amp relay outputs (n/o, n/c, com)
• Output ‘ON’ LED indication
Communicators
Com300
• Multi-protocol communicator supporting Fast Format,
Contact ID, SIA Level II and EasyCom Pager protocols
• 300-baud modem for remote uploading and
downloading using the Wintex UDL software and a PC
• For use with an analogue telephone line (REN = 1)
Com2400
• Multi-protocol communicator supporting Fast Format,
Contact ID, SIA Level II and EasyCom Pager and SMS
Messaging protocols
• 2400-baud modem for remote uploading and
downloading using the Wintex UDL software and a PC
• Sends SMS text messages to mobile phones
• For use with an analogue telephone line (REN = 1)
ComISDN
• Multi-protocol communicator supporting Fast Format,
Contact ID, SIA Level II and EasyCom Pager protocols
• 300-baud (analogue) or 19200-baud (digital) Modem for
remote uploading and downloading using the Wintex
UDL software and a PC
• For use with an ISDN telephone line
ComIP
• Multi-protocol communicator supporting Fast Format,
Contact ID and SIA Level II protocols via TCP/IP
• High speed modem for remote uploading and
downloading using the Wintex UDL software and a PC
• For use with ADSL/DSL/Broadband/WAN/LAN etc.
RP9 Radio-Pad
• Paknet radio communicator supporting Fast Format and
Contact ID protocols
• 4800-baud modem for remote uploading and
downloading using the Wintex UDL software and a PC
GSM Module
• Provides a GSM telephone path for Premier Digital
Communicators
• Sends SMS text messages to mobile phones
• Arm, Disarm, Reset the alarm, turn outputs on and off,
omit zones and send messages to the control panel
using SMS text messages
• 9600-baud modem for remote uploading and
downloading using the Wintex UDL software and a PC
To Next Page
