Texi Compacta - Thread Tension Adjustment; Stitch Length Adjustment

EN
10
TEXI Compacta
9. Thread tension adjustment
Depending on the type of material and thread, a different thread tension is required. Tension is adjusted by turning the thread
tensioner knob, located on the top of the machine arm.
In order to increase the thread tension, turn the knob clockwise. In order to decrease the thread tension, turn the knob counter
clockwise. Do not increase or decrease the thread tension by more than a quarter of a turn at once. Make sure the thread is
properly tensioned and, if necessary, re-adjust it.
10. Stitch length adjustment
Open the side cover by loosening two screws. Unscrew two screws (1) of the stitch length adjusting ring (2). Turn ring (2) up
to achieving the desired value, indicated in the groove of the eccentricity index. Then carefully tighten the screws (1).
Preset value of the stitch length is "6".
119
RU
TEXI Compacta
ДЕКЛАРАЦИЯ СООТВЕТСТВИЯ ЕС
Дистрибьютор:
Strima Sp. z o.o.
Swadzim, ul. Poznańska 54
62-080 Tarnowo Podgórne
Poland
производитель заявляет, что продукт:
TEXI COMPACTA
(CM-500L-1)
Портативная машина
для слепого стежка
которой касается настоящая декларация, отвечает
требованиям нижеследующих директив:
2006/42/EC
2014/35/EU
Гармонизированные нормы:
EN ISO 10821: 2005
EN ISO 12100: 2010
Annex I of 2006/42/EC
EN 602004-1: 2006+A1:2009
Сертификат номер.: CTL13530836-OC
Отчет об испытаниях №: CTL130530836-SMD01, CTL130530836-
SMD02, CTL130530836-SMD03