Texi Joy 13 Owlstone

Texi Joy 13 71
EN
CLEANING THE FEED DOG
OILING THE MACHINE
Remove the needle and the presserfoot.
Remove the needle plate set screws and remove the needle plate.
With a brush, clean out dust from the feed dog teeth. Insert the needle plate.
Apply a few drops of ne quality sewing machine oil to the point indicated by the
arrows in the gures.
For machine in constant use, oil two or three times a year.
In case the machine does not work smoothly due to standing idle for some time,
apply a few drops of kerosene at the oiling point, and run the machine rapidly for a
minute.
Before oiling, wipe o oiling points.

Texi Joy 13 Specifications

General

Brand	Texi
Model	Joy 13
Category	Sewing Machine
Language	English