The water-filled motor is provided with single-lip oilseals to prevent the pumped medium from
entering the motor
To prevent sand / small stones from entering the seal chamber, a sand guard is provided
The TSSM and SSM series products have a single impeller rotating within a volute casing
The SVSM series is a multi-stage pump with NORYL impellers rotating inside a NORYL
diffuser housing
The impeller of TSSM and SSM are dynamically balanced. Impellers of SVSM are plastic injection
molded and hence do not need to be dynamically balanced
The delivery pipe engages with the mating thread provided on the delivery chamber of the SVSM
Strainer assembly, fitted on the pump suction flange of TSSM and SSM products, prevents the
entrance of large size debris into the pump. For SVSM products, a strainer is wrapped around the
suction chamber, prevents debris from entering the pump
Standard products are supplied with a 3-m long 3-core PVC-insulated flat cable
On demand, 10-m long cable can also be supplied with TSSM models
Control panel is offered with some of our products
For products supplied without a control panel, the customer shall ensure appropriate capacitors
are used (CSCR)
Electrical connection
OMOW002A 8 2020.01
To Next Page
Loading...
Need help?
General
