Textron Cessna - Page 95

McCAULEYPROPELLERSYSTEMS
CONSTANTSPEEDCOMPOSITEOWNER/OPERATOR
INFORMATIONMANUAL
C2614
2614T1082
Feed Shoe
0.125 INCH (3.175 mm)
Cement Set Back
(Bare Blade Area)
0.50 INCH (12.7 mm)
Masking Tape Set Back
Overlap Edge of Feed Shoe with
Sealant by 0.125 INCH (3.175 mm)
Sealer Area
Cement Area
Dimension W
Distance from the
retaining ring to the
start of the feed
shoe center groove
Retaining Ring
Groove
Leading Edge
Guard
Leave at least 0.125 inch
(3.18 mm) of the leading
edge guard bare metal with
no sealer.
PropellerAnti-iceFeedShoes
Figure201(Sheet2)
61-13-45Page206
©McCauleyPropellerSystemsJan9/2017