Pagina 30 di 48
STDITR01ADP2090EV TECNOFRIGO TUSCANY srl
Inspection
During installation or when you need to work on the unit, you must strictly follow the rules reported on
this manual, follow the instructions on the unit and take any necessary precautions. Failure to follow the
instructions set can cause dangerous situations. After receiving the unit, verify the completeness of the
dryer: the unit left the factory in perfect condition; any damage must be immediately reported to the
carrier and recorded on the Delivery Note before signing it. The Company must be informed the extent
of the damage within 8 days. The Customer must prepare a written statement of any severe damage.
Before accepting delivery, please check that:
• the machine has not been damaged during transport;
• the machine is the same as specified in the transport document
In case of damage or abnormalities:
• note immediately damage on the delivery page;
• inform the supplier of the extent of the damage, within 8 days of receipt. Reports after this
deadline are not valid ;
• in the event of substantial damage prepare a written statement.
Storage
If you need to store the unit, leave it packed in a closed place. If for some reason the unit was already
unpacked follow these guidelines to prevent damage, corrosion and/or deterioration:
Make sure that all openings are securely closed or sealed;
To clean the unit, never use steam or other cleaning agents that could damage it;
Take away and leave to the site manager any keys providing access to the control panel.
Unpacking
The packaging may be dangerous for operators.
It is advisable to leave the unit packed during handling and unpacking only at installation. The packaging
unit has to be removed with care to avoid causing damage to the machine. The materials of the packaging
may be of a different nature (wood, cardboard, nylon etc.)..
Packaging materials should be stored separately and delivered for disposal or possible
recycling in order to reduce any impact on the environment.
To Next Page
Loading...