5
Caution: The top plate material of this appliance is Glass!
In order to avoid dangerous situation arising from breakage
of glass, DO NOT apply heavy weight or strong impact on
glass top.
DO NOT make any scratch at the bottom side of glass, it will
cause breakage while in use.
1. Connect cable connectors at base tray to that at bottom of
glass top.
2. Align glass top’s opening with burner.
Pay attention not to squeeze the cables in between glass
top and base tray.
Pay attention not to place the cables near burners.
3. Align openings of cover discs with spark electrodes and
flame failure safety sensors.
Fix cover discs with screws ( 2 pieces for each burner, total 4
pieces).
4. Fix the timer knob.
Timer
knob
Installation Instructions
Installation Procedures
Cover Disc
Spark
Electrode
To Next Page
Loading...
