The Singing Machine SDL2093 Studio - Playback of Recorded Files; Selecting and Playing Recorded Files

— 27 —
Operation
Playing Songs from the Recorded Files
1
Connect the unit as described previously
and make sure a USB drive is inserted
into the USB port. Press the STANDBY/
ON button to turn the unit on.
2
Press the Navigation Right or 
Left button to select the Recordings
mode and press the ENTER button
to continue; the Function indicator
will light red. You can also repeatedly
press the FUNCTION button until the
Function indicator lights red to select
the Recordings mode.
Notes:
• The Recording mode cannot be entered
unless a USB flash drive is inserted.
• A loading icon
will appear when the
system is loading the files.
3
Use the Navigation 5 Up and  Down
buttons to navigate through the list of
recorded files that you have previously
recorded on your USB drive.
4
Press the ENTER button to start
the recorded audio file playback. Press
the ENTER button during playback
to pause the file.
5
Adjust the volume to a comfortable
level using the MASTER VOLUME
control.
3
4
5
2
1
2
5
4
3