— 29 —
Operation
Using the LINE IN Jack
1
Connect the unit as described
previously. Press the STANDBY/ON
button to turn the unit on.
2
Connect the external unit to the LINE
INPUT Jack using a 3.5mm auxiliary
audio cable (not included). Connecting
an external unit will allow the audio
to be played through your Singing
Machine.
Notes:
• It is highly recommended to set the
volume on the auxiliary unit to 1/3 or
lower to avoid distortion.
• Skipping files/tracks is not possible in this
unit when using an external device.
3
Press the
Navigation Right or
Left
button to select the Line In mode
and press the ENTER button to
continue; the Function indicator will
light green. You can also repeatedly
press the FUNCTION button until
the Function indicator lights green to
select the Line In mode.
4
Adjust the volume using the MASTER
VOLUME control on this unit or
external device.
5
Connect the microphone(s). Slide
the Mic’s ON/OFF switch to the ON
position.
2
1
3
3 4
y
To Next Page
Loading...
