KNX Product handbook RAMSES 718 P / RAMSES 718 S
Contents
1 Function description 3
2 Operation 4
3 Technical data 5
4 The application programmes RAMSES 718 P/S 6
4.1 Selection in the product database 6
4.2 Overview of communication objects 7
4.3 Description of communication objects 20
4.4 Parameter pages overview 33
4.5 General parameters 34
4.6 Room temperature controller RTC functional block 36
4.7 External inputs I1-I4 functional block 55
5 Typical applications 73
5.1 Location school: Heating with presence detector and frost
protection via window contact. 73
5.2 Location single-family house: 77
5.3 Switching, dimming light and controlling blinds 80
5.4 Two-stage heating for floor and radiators 83
6 Appendix 85
6.1 LED colors for temperature control 85
6.2 PWM cycle 86
6.3 Operating mode as scene (RTC) 88
6.4 set point correction 89
6.5 Temperature control 92
6.6 Continuous and switching control 95
6.7 Hysteresis 96
6.8 Dead zone 97
6.9 Operating mode selection 99
6.10 Determination of the set point 103
6.11 set point offset 105
6.12 Base set point and current set point 106
To Next Page
Loading...
Need help?
General