Theben KNX Series User Manual

The application programmes RAMSES 718 P/S
RAMSES 718 P / RAMSES 718 S 27
4.3.3 Objects for the external inputs: Switch function
Object 30: channel l1.1
First initial object of the channel (First telegram).
6 telegram formats can be set:
Switching ON/OFF, priority, send percentage value, send value, 2 byte DPT 9.x, 4 byte DPT 14.x.
Object 31: channel I1.2
Second initial object of the channel (Second telegram).
6 telegram formats can be set:
Switching ON/OFF, priority, send percentage value, send value, 2 byte DPT 9.x, 4 byte DPT 14.x.
Object 32: channel I1.3
Third initial object of the channel (Third telegram).
6 telegram formats can be set:
Switching ON/OFF, priority, send percentage value, send value, 2 byte DPT 9.x, 4 byte DPT 14.x.
Object 34: Channel I1 block = 1, or block = 0
The channel is blocked via this object.
The acting direction of the block object and behaviour when setting or cancelling the block can
be set on the Channel 1 parameter page.
Objects 35-49
Objects for channels I2-I4.

Theben KNX Series Specifications

General

Communication Protocol	KNX
Ambient Temperature	-5°C to +45°C
Storage Temperature	-25°C to +70°C
Protection Class	IP20
Relative Humidity	5% to 95%, non-condensing
Operating Voltage	24 V DC (via KNX bus)