Theben KNX Series User Manual

The application programmes RAMSES 718 P/S
RAMSES 718 P / RAMSES 718 S 62
4.7.3.1 Dimming parameter page
Designation
Values
Description
Response to
"long" / "short"
The input distinguishes between
a long and a short button push,
and can thus carry out 2
functions.
One button operation
The dimmer is operated with a
single push button.
Short button push = ON/OFF
Long button push
= brighter/darker
release = stop
With the other variants, the
dimmer is operated using 2
buttons (rocker).
brighter/ON
Short button push = ON
Long button push = brighter
Release = stop
brighter/BY
Short button push
= ON/OFF
Long button push = brighter
Release = stop
darker/OFF
Short button push = OFF
Long button push = darker
Release = stop
darker/BY
Short button push
= ON/OFF
Long button push = darker
Release = stop
Increment for dimming
With a long button push, the
dimming value is:
100%
Increased (or decreased) until the
button is released.
50%
25%
12.5%
6%
3%
1.5%
Increased by the selected value
(or reduced)
Response in case of bus and
mains restoration
none
Do not react.
ON
Switch on dimmer
OFF
Switch off dimmer

Theben KNX Series Specifications

General

Communication Protocol	KNX
Ambient Temperature	-5°C to +45°C
Storage Temperature	-25°C to +70°C
Protection Class	IP20
Relative Humidity	5% to 95%, non-condensing
Operating Voltage	24 V DC (via KNX bus)