2. When the Welcome to Microsoft Windows XP screen appears, click Perform
Additional Tasks.
3. Click Browse this CD.
4. In Windows Explorer, navigate to ValueAdd > Msft > Ntbackup.
5. Double-click Ntbackup.msi to install the backup utility.
Once installed, you can use the Windows Backup Utility by following the steps
below:
1. Click Start, and point to All Programs > Accessories > System Tools >
Backup to start the wizard.
2. Click Next to skip past the opening page. Choose Backup files and
settings from the second page, and then click Next.
3. Select which option you want to back up.
4. Click Next and in the Backup Type, Destination, and Name page, specify a
backup location using the Browse button.
5. Find and select the drive that specifies your Thecus IP storage as your
backup destination and click Next.
6. Click Next to display the wizard’s final page and click Finish to start
backing up.
Apple OS X Backup Utilities
Mac OS X does not include any backup software. However, there are a number of
backup solutions available for the Mac OS X, including: iBackup, Psyncx, iMSafe,
Rsyncx, Folder Synchronizer X, Tri-BACKUP, Impression, Intego Personal Backup,
SilverKeeper, and Apple's dotMac Backup utility to name just a few. To find even
more freeware and shareware backup utilities to choose from, go to VersionTracker
or MacUpdate and search on "backup".
External Devices
The Thecus IP storage supports printer server and UPS via USB interface. The
integrated Print Server allows you to share a single USB printer with all users on the
network. For the UPS, Thecus IP storage support via USB, Series and Network
interface. The following section shows you how.
Printers
From the External Devices menu, choose the Printer item, and the Printer
Information screen appears. This screen provides the following information about
the USB printer connected to the USB port.
To Next Page
Loading...
Need help?
General
