Thecus N0503 User Manual

116
Add Nsync Task
Item Description
Task Name The name of your Nsync task.
Target Server
Manufacturer
Select replication to method, it has 3 options can choose from.
NAS: To other Thecus IP storage with security tunnel build up.
Legacy FTP: To the 3
rd
party FTP server or Thecus IP storage while
it has acted as FTP server.
Native Rsync Server: Using rsync to replicate data to other Thecus
IP storage
Nsync Mode Synchronize mode or Incremental mode .
Target Server IP
Address
The IP address of your target server.
Source Folder The share folder you want to backup.
Authorized Username
on Target Server
The account name on the target server.
Password on Target
Server
The password for the username on the target server.
Test Connection Click to check the connection to the Target Server.
Schedule Enable or Disable schedule backup of your share folders.
Time The time when the Nsync task will run.
Type Select whether to run the Nsync task daily, weekly, or monthly.
Daily: input the time of day to execute Nsync task.
Weekly: input which day of the week to execute the task.
Monthly: decide which day of the month to execute the task.
Add Press Add to submit your settings.
NOTE
Before starting an Nsync Task, make sure the target
server’s Nsync Server (or FTP Server) is enabled.
NOTE
Using
“
Native Rsync Server
”
to backup data to other
Thecus NAS devices needs to enable target server and
setup a valid username and password to grant access
permission.

Thecus N0503 Specifications

General

RAID levels	0, 10, 1, JBOD, 5, 6
Storage drive size	3.5 \
Storage drive capacity	500 GB
Storage drive interface	Serial ATA
Storage drives installed	Yes
Installed storage drive type	-
Total installed storage capacity	1.5 TB
Maximum supported storage capacity	6 TB
Number of storage drives installed	3
Number of storage drives supported	5
Internal memory	1 GB
Internal memory type	DDR2
Processor family	Intel Atom®
Networking features	Gigabit Ethernet
Compatible operating systems	Windows 7/2000/XP/2003/Vista Mac OSX
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Power supply unit (PSU) capacity	96 W
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Product color	Stainless steel
Type	NAS
Device class	Home & Home Office