EasyManuals Logo

Thecus N0503 User Manual

Thecus N0503
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
30
6. Name your Thecus IP storage and configure the network IP address. If your
switch or router is configured as a DHCP Server, configuring the Thecus IP
storage to automatically obtain an IP address is recommended. You may also
use a static IP address and enter the DNS Server address manually.
7. Change the default administrator password.
8. Finished! Access the Thecus IP storage Web Administrator Interface by
pressing the Start Browser button. You can also configure another Thecus
IP storage at this point by clicking the Setup Other Device button. Press
Exit to exit the wizard.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thecus N0503 and is the answer not in the manual?

Thecus N0503 Specifications

General IconGeneral
RAID levels0, 10, 1, JBOD, 5, 6
Storage drive size3.5 \
Storage drive capacity500 GB
Storage drive interfaceSerial ATA
Storage drives installedYes
Installed storage drive type-
Total installed storage capacity1.5 TB
Maximum supported storage capacity6 TB
Number of storage drives installed3
Number of storage drives supported5
Internal memory1 GB
Internal memory typeDDR2
Processor familyIntel Atom®
Networking featuresGigabit Ethernet
Compatible operating systemsWindows 7/2000/XP/2003/Vista Mac OSX
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Power supply unit (PSU) capacity96 W
Ethernet LAN data rates10, 100, 1000 Mbit/s
Product colorStainless steel
TypeNAS
Device classHome & Home Office

Related product manuals