EasyManuals Logo

Thecus N0503 User Manual

Thecus N0503
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
90
ACL setting
Item Description
Deny Denies access to users or groups who are displayed in this column.
Read Only Provides Read Only access to users or groups who are displayed in
this column.
Writable Provides Write access to users or groups who are displayed in this
column.
Recursive Enable to inherit the access right for all its sub-folders.
To configure folder access, follow the steps below:
1. On the ACL screen, all network groups and users are listed in the left hand
column. Select a group or user from this list.
2. With the group or user selected, press one of the buttons from the three
access level columns at the top. The group or user then appears in that
column and has that level of access to the folder.
3. Continue selecting groups and users and assigning them access levels using
the column buttons.
4. To remove a group or user from an access level column, press the Remove
button in that column.
5. When you are finished, press Apply to confirm your ACL settings.
To setup sub-folders ACL, click on “ ” symbol to extract sub folders list as screen
shot shows below. You may carry on with same steps as share level ACL setting.
NOTE
If one user has belonged to more than one group but different privilege than
the priority Deny > Read Only > Writable

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thecus N0503 and is the answer not in the manual?

Thecus N0503 Specifications

General IconGeneral
RAID levels0, 10, 1, JBOD, 5, 6
Storage drive size3.5 \
Storage drive capacity500 GB
Storage drive interfaceSerial ATA
Storage drives installedYes
Installed storage drive type-
Total installed storage capacity1.5 TB
Maximum supported storage capacity6 TB
Number of storage drives installed3
Number of storage drives supported5
Internal memory1 GB
Internal memory typeDDR2
Processor familyIntel Atom®
Networking featuresGigabit Ethernet
Compatible operating systemsWindows 7/2000/XP/2003/Vista Mac OSX
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Power supply unit (PSU) capacity96 W
Ethernet LAN data rates10, 100, 1000 Mbit/s
Product colorStainless steel
TypeNAS
Device classHome & Home Office

Related product manuals