Thecus N8800 User Manual

24
3. Open the front door then press the power button boot up the N0503.
To connect the N4200 series product to your network, follow the steps below:
1. Connect an Ethernet cable from your network to the WAN/LAN1 port on the
back panel of the N4200.
2. Connect the provided power cord into the universal power socket on the back
panel. Plug the other end of the cord into a surge protector socket.
3. Press the power button on the Front Panel to boot up the N4200.

Thecus N8800 Specifications

General

Brand	Thecus
Model	N8800
Category	Network Storage Server
Language	English