Thermal Dynamics 1Torch SL100 Hand Torch User Manual

PARTS LISTS 6-8 Manual 0-2962
6.06 Hand Torch Consumables
The illustration shows all consumable parts for the SL60
and SL100 hand torches. Refer to the Appendix pages
covering the power supply being used to ensure proper
selection for the application.
Various front - end torch parts are available for different
applications.
Use the single - piece shield cup for general purpose cut-
ting operations with the torch tip in contact with the work
(up to 40 amps). This is the preferred method of cutting
TIFFUNFUBMVQUPPSNNUIJDL
Also use the single - piece Shield Cup for 'standoff' cut-
UJOHXJUIUIFUPSDIUJQUPGSPNUIFXPSLQJFDF
This is the preferred method for cutting metal thicker than
NNBOEBUDVSSFOUMFWFMTBCPWFBNQT5IJT
provides maximum visibility and accessibility.
The Standoff Guide fits Shield Cup No. 9-8218 and enables
the user to maintain a consistent standoff height for most
applications.
6TFUIF4IJFME$VQ#PEZXJUIUIF%FnFDUPS4IJFME$BQGPS
FYUFOEFEQBSUTMJGFBOEJNQSPWFESFTJTUBODFUPSFnFDUFE
heat. This combination provides cutting results similar to
the single-piece Shield Cup, as well as easy change-over
to gouging or drag shield cutting.
Use the Shield Cup Body with the Drag Shield Cap for a
consistent standoff distance with the drag shield in contact
with the workpiece. This is a simple and operator-friendly
method of cutting between 50 and 100 amps.
Use the Shield Cup Body with the Gouging Shield Cap
for excellent gouging performance and enhanced torch
parts life.
The electrode and starter cartridge are the same for all
operations.
6.07 Hand Torch Spare Parts Kits
Item
Catalog No.
40-Amp Kit,
Cat No.
5-0050
60-Amp Kit,
Cat No.
5-0075
80-Amp Kit,
Cat No.
5-0110
100-Amp Kit,
Cat No.
5-0170
Electrode9-82153 333
40A Drag Tip9-82075 222
40A Standoff Tip9-82082
50128-9piT ffodnatS A06
51128-9piT ffodnatS A08
52128-9piT ffodnatS A001
1117328-9ydoB puC dleihS
15328-9A06-05 ,paC dleihS garD
116328-9A001-07 ,paC dleihS garD
Large O-Ring 8-3487 11
11
Small O-Ring 8-3486 11
11
Standoff Guide9-8251 1
1111828-9ediuG ffodnatS
Hand Torch Spare Parts Kit Contents

Thermal Dynamics 1Torch SL100 Hand Torch Specifications

General

Brand	Thermal Dynamics
Model	1Torch SL100 Hand Torch
Category	Welding Accessories
Language	English