Thermia iTec XT Installation Guide

iTec XT Total and iTec XT Compact system proposal with buffer tank.
This installation produces hot water, heating and/or cooling. The control module comes with an outdoor sensor, radiator out sensors,
condenser pump, 3-way valve, electric auxiliary heater, and a 180 litre water tank .
The supply line temperature and buffer tank sensor are controlled with reference to the outside
temperature following a set heat curve. The additional heater starts automatically on demand if auto mode is selected. The auxiliary
heater carries out peak heating charging (anti-legionella function) in those operating modes that permit auxiliary heat.
iTec XT Total and iTec XT Compact with buffer tank sensor:
Installation Guide iTec XT
AWIXT01IG0102 Thermia AB
22

Thermia iTec XT Specifications

General

Brand	Thermia
Model	iTec XT
Category	Measuring Instruments
Language	English