Thermo Haake DK15 - Table of Contents

!
Table of Contents
1
Before starting up:
The lubricating oil in the cooling compressor may flow
into the tubing of the cooling circuit during transport.
This will prevent the cooling unit from functioning.
24 hours should be allowed between unpacking
and setting and starting operation to allow the oil to
collect back in the oil sump.
1. Quality Assurance 2. . . . . . . . . . . . . . . . . . . .
2. Your Contacts at Thermo Haake 2. . . . . . . .
3. Unpacking, Contents of Delivery 4. . . . . . .
3.1 Unpacking 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 Contents of delivery 4. . . . . . . . . . . . . . . . . . . . . .
3.3 Information concerning the CE sign 5. . . . . . . .
4. Unit Description 6. . . . . . . . . . . . . . . . . . . . . .
4.1 Flow-Through Cooler DK15 6. . . . . . . . . . . . . . .
4.2 Immersion cooler EK20 7. . . . . . . . . . . . . . . . . .
4.3 Immersion cooler EK30 7. . . . . . . . . . . . . . . . . .
4.4 Cooling circuits 8. . . . . . . . . . . . . . . . . . . . . . . . . .
5. Functional Elements 9. . . . . . . . . . . . . . . . . .
5.1 Flow-through cooler DK15: 9. . . . . . . . . . . . . . .
5.2 Immersion coolers EK20 and EK30: 10. . . . . . .
6. Connecting the Hoses 11. . . . . . . . . . . . . . .
7. Fitting an Evaporator Bath Bridge 12. . . .
8. Operation 13. . . . . . . . . . . . . . . . . . . . . . . . . .
8.1 Connecting to the mains 13. . . . . . . . . . . . . . . . . .
8.2 Flow-through cooler DK15 13. . . . . . . . . . . . . . . .
8.3 Immersion coolers EK20 and EK30 13. . . . . . . .
9. Maintenance 13. . . . . . . . . . . . . . . . . . . . . . . .
10. Accessories / Technical Specifications 14
10.1 Fuse values 15. . . . . . . . . . . . . . . . . . . . . . . . . . . .