1
2
3
3
View of open
packing from above
1
!
2
3
B
C
E
D
Unpacking / Contents of Delivery
4
3. Unpacking, Contents of Delivery
3.1 Unpacking
Please follow the procedure stated below in order to
avoid damaging the EK20/EK30 cooling hose:
Grasp middle polystyrene packaging material at and
remove in an upwards direction.
Do not bend or allow the cooling hose to kink!
Remove the unit and remaining packaging material by lifting
at the grips .
Transport damage?
• Notify carrier (forwarding merchant, railroad,
post office) etc,
• Compile a damage report.
Before return delivery:
• Inform dealer or manufacturer
(Small problems can often be dealt with on the spot).
3.2 Contents of delivery (please check)
DK15 Flow-through cooler:
2 Union nuts (E), (fitted to the unit)
2 Capping plugs (D), (fitted to the unit)
2 Hose connection pieces for 8mm i.d. hoses (B),
2 Hose connection pieces for 12mm i.d. hoses (C),
4 Hose clips, 1 Instruction manual,
1 Warranty card (please fill out and return)
EK20 and EK30 Immersion coolers:
1 Set of mounting elements (2 platings, 2 screws) for fixing
the heat exchanger to the Thermo Haake bath bridge H32,
1 Instruction manual, 1 Warranty card (please return)
To Next Page
Loading...