!
!
!
!
!
!
!
Safety Notes
3
Safety Notes
The intended workplace should correspond to a laboratory
or pilot plant environment. The user should have an educa-
tion level which is at least equivalent to a trained laboratory
worker or specialized chemist. The following list should be
seen as an example.
The device may not be operated if there are any doubts
regarding a safe operation due to the outer appearance.
A safe operation of the instrument cannot be guaran-
teed if the user does not comply with this manual.
Only use this unit solely for the intended application.
Repairs, alterations or modifications must only be car-
ried out by specialist personnel. Considerable damage
can be caused by improper repairs. The Thermo Haake
service department is at your disposal for repair work.
Do not operate the unit with wet or oily hands.
This device is not designed according to the standard
EN 60601-1: 1990 (DIN VDE 0750-1 and IEC 601-1) and
should not be operated in rooms used for medical pur-
poses and/or in the vicinity of patients.
The following measures were taken to protect the operator:
• Protection Class I according to VDE 0106 T1
i. e. protection against electric shocks by grounding all parts
within easy reach of the operator.
The device must only be connected to mains receptacles
with a protective ground.
• Protection IP 30 according to DIN 40 050
i. e. regarding the protection against accidently touching live
parts and damage by foreign matter, it has been ensured that
foreign bodies with a thickness or diameter of more than
2.5 mm cannot penetrate. Do not push wires or tools through
any of the openings.
No special precautions were taken against the penetration of
water and dust. The device should therefore not be used in a
dusty atmosphere or in the neighborhood of spray water.
Complete separation from the mains is required when:
– all dangers caused by this device are to be avoided,
– cleaning is carried out,
– repairs or maintenance work is about to be carried
– out (by service personnel only).
To Next Page
Loading...