38
TK 61651-18-OP-EN
3. Press the Select key twice to return to the Standard Display (three times
in bi-temperature units and in reverse cycle units), where the letters dEF
and the DEFROST symbol will appear when the defrost cycle starts (the
load compartment temperature must be lower than 0ºC).
NNoottee:: The letters dEF will remain on screen for a while after returning to cool
mode.
Initiating the Condenser Manual Defrost Cycle
(reverse cycle units only)
IImmppoorrttaanntt:: Before initiating a manual defrost, ensure that the unit is not
already in a defrost cycle. When the unit is in a defrost cycle the
defrost symbol appears on screen.
1. Press and release the Select key twice, and the letters dFC will appear
(flashing) on screen along with the present defrost condition OFF.
OOppeerraattiinngg IInnssttrruuccttiioonnss
To Next Page
Loading...
Need help?
General
