Need help?Do you have a question about the Thermo Scientific 61-12C and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | 61-12C |
| Category | Accessories |
| Language | English |
Explains the typographical and formatting conventions used within the manual.
Details the types of safety warnings and cautions provided throughout the document.
Provides overarching safety guidelines for installation and operation.
Instructions for checking the equipment for damage upon receipt.
Introduces the Model 61-12C Speed Sensor and its basic function.
Describes the sensor's intended use and operational parameters.
Guides on how to properly unpack and inspect the sensor after shipment.
Specifies the correct environmental conditions for storing the speed sensor.
Details the methods for physically coupling the sensor to the drive shaft.
Instructions for installing the restraint arm and spring for proper sensor movement.
Guidance for installing the sensor when primary shaft access is limited.
Covers the necessary wiring procedures and safety precautions for the sensor.
Explains the sensor's pulse generation and output signal characteristics.
Details the sensor's output voltage, pulse rate, and power requirements.
Advises on checking shaft coupling and restraint arm for proper function.
States that no specific adjustment or calibration is required for the device.
Provides instructions and contact details for ordering replacement parts.
Contains a list of part numbers and descriptions for the speed sensor's components.
Presents detailed engineering drawings showing the sensor's physical dimensions and installation.
Introduces the Factory Mutual approval report for the speed sensor.
To Next Page