Need help?Do you have a question about the Thermo Scientific Dionex Aquion RFIC and is the answer not in the manual?
General| Type | Ion Chromatography System |
|---|---|
| Manufacturer | Thermo Scientific |
| Model | Dionex Aquion RFIC |
| Technology | Reagent-Free Ion Chromatography (RFIC) |
| Application | Water analysis, environmental monitoring, food and beverage analysis, pharmaceutical analysis |
| Detection Method | Conductivity, UV-Vis |
| Column Type | IonPac columns |
| Software | Thermo Scientific Chromeleon Chromatography Data System (CDS) |
| Pump Type | Dual-piston serial pump |
| Detector Types | Conductivity detector, UV-Vis detector |
| Power Requirements | 100–240 V, 50/60 Hz |
User-accessible components behind the front door.
How Chromeleon software controls the system and processes data.
Detailed information on individual system components.
Procedure for powering up the instrument and connected computer.
Steps to establish communication between the instrument and Chromeleon software.
How to set initial system parameters for analysis.
Steps to equilibrate the system and confirm readiness for analysis.
Methods for loading samples into the loop and injecting them into the system.
Explanation of error messages, icons, and severity levels in Chromeleon.
Common symptoms related to system component failures.
Procedure to locate restrictions causing excessive system backpressure.
Instructions for replacing tubing and fittings in the RFIC system.
Steps to rebuild the injection and auxiliary valves for proper function.
Procedures for cleaning or replacing pump check valves.
Detailed instructions for replacing pump piston seals.
Instructions for replacing the suppressor unit.
Guide for replacing the eluent valve.
Steps for replacing the system's leak sensor.
Standard procedure for priming the pump and eluent lines.
Comprehensive guide for replacing Eluent Generator Cartridges (EGC).
Procedure for replacing the Continuously Regenerated Trap Column.
Steps to replace the carbonate mixer unit.
To Next Page