Need help?Do you have a question about the Thermo Scientific Orion 2120XP and is the answer not in the manual?
General| Type | Silica Analyzer |
|---|---|
| Parameter | Silica |
| pH Range | Not applicable |
| Temperature Compensation | Automatic |
| Sample Temperature | 5-50°C (41-122°F) |
| Sample Pressure | 0 to 6 bar |
| Ambient Temperature | 5 to 45 °C (41 to 113 °F) |
| Ambient Humidity | 5-95% non-condensing |
| Power | 100-240 VAC, 50/60 Hz |
| Outputs | 4-20 mA |
| Alarms | Configurable alarms |
| Accuracy | ±2 ppb or ±2% of reading, whichever is greater |
| Calibration | Automatic calibration |
| Input | Sample water |
| Display | Backlit LCD |
Essential safety precautions and steps for connecting the analyzer to power.
Instructions for wiring and installing various electrodes and probes.
Guide to programming analyzer settings, including passwords and channel options.
Steps for safely shutting down, starting up, and maintaining the analyzer.
Step-by-step guide for DKA calibration, including error handling.
Troubleshooting calibration errors and using custom standards or offline calibration.
Diagnosing and resolving low or high slope problems during calibration.
A guide to identifying and resolving common malfunctions and error codes.
To Next Page