EasyManua.ls Logo

Thermo Scientific Prima PRO - Hazardous Area Systems; Fan Noise

Thermo Scientific Prima PRO
203 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Information
System Safety
Thermo Fisher Scientific Prima PRO & Sentinel PRO Mass Spectrometers User Guide 2-7
Warning! Specific safety considerations for installation,
commissioning, operation, and maintenance of the Prima PRO Ex
and Sentinel PRO Ex instruments in hazardous areas are given in
Appendix A: Hazardous Area Operation. The points covered in that
section must be considered in addition to the points above.
For Ex systems, the instructions in Appendix A: Hazardous
Area Operation take precedence over content in the rest of the
manual.
For Ex systems, always defer to the instruction in Appendix
A: Hazardous Area Operation.
Note: At full speed, the noise level from the air conditioner fan can
be up to 65 dBA. Although this is below a level considered harmful,
it can be intrusive if the installation is in a confined space, laboratory
environment, or where ambient background noise levels are low.
If the installation is in an environment where ambient temperatures
are not expected to exceed 30°C, a speed limiter can be switched in
to the fan supply, which will reduce the maximum noise level to < 55
dBA.
Hazardous Area
Systems
Fan Noise

Table of Contents

Related product manuals