Need help?Do you have a question about the Thermo Scientific thermoscientific Vanquish UHPLC System and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | thermoscientific Vanquish UHPLC System |
| Category | Laboratory Equipment |
| Language | English |
Provides instructions for installation, setup, operation, maintenance, and troubleshooting of the system.
Describes conventions used throughout the manual, including safety messages and special notices.
Explains safety symbols and signal words used in the manual to convey hazards.
Defines the system's intended purpose for analyzing compound mixtures in sample solutions.
Outlines essential safety precautions for system installation, operation, and maintenance.
General safety guidelines applicable to all phases of system use and handling.
Specifies the necessary qualifications for personnel installing and operating the system.
Details required personal protective equipment for safe handling of hazardous substances.
Highlights potential residual hazards like hazardous substances and biohazards.
Provides critical instructions for actions to take in emergency situations.
Offers recommendations and guidelines for using solvents and additives.
Describes the standard configurations of Vanquish systems and their modules.
Details the solvent rack's function for storing solvent reservoirs securely.
Explains the system base as a mandatory part providing power control and storage.
Introduces system operation, primarily via Chromeleon software.
Provides step-by-step instructions for unpacking the solvent rack and system base.
Lists the items included in the system delivery.
Emphasizes safety guidelines to be observed during system installation.
Outlines the general steps for installing the Vanquish system.
Specifies requirements for the installation site to ensure optimal performance.
Defines workbench requirements for placing and supporting the Vanquish system.
Highlights important considerations regarding power supply and connections.
Provides safety warnings and guidelines for using power cords.
Warns about condensation damage to electronics and how to avoid it.
Specifies environmental conditions like temperature and humidity for operation.
Details how to set up system hardware, including connectors and cables.
Provides instructions for physically assembling the system modules.
Explains how to connect signal cables for system communication.
Guides on how to connect system modules to the power source.
Provides an overview and guidelines for setting up fluid connections.
Details how to connect and handle capillaries, fittings, and tubing.
Explains the process of connecting waste lines for proper disposal.
Provides step-by-step instructions for powering on the system.
Guides on configuring the Vanquish system using Chromeleon software.
Describes how to flush the system after installation.
Highlights safety guidelines crucial for operating the chromatography system.
Details additional steps required before system operation and sample analysis.
Provides guidelines for optimal system performance using solvents and additives.
Explains how to operate the Vanquish system using Chromeleon software.
Instructions for starting the Chromeleon Instrument Controller and client.
Guides on creating and running sequences for automated sample analysis.
Provides guidelines for short-term and long-term system shutdown.
Highlights safety guidelines for performing maintenance and service procedures.
Outlines rules and recommendations for successful maintenance procedures.
Details routine and preventive maintenance procedures for system upkeep.
Suggests a regular maintenance schedule based on system usage.
Provides procedures for cleaning and decontaminating system components.
Explains procedures for safely transporting or shipping the system.
Provides general information and tips for resolving operating issues.
Guides on identifying and resolving issues related to system modules and connections.
Troubleshooting guide for issues related to peak shape, such as tailing or broadening.
Addresses troubleshooting for ghost peaks, negative peaks, and spikes in chromatograms.
Troubleshooting for issues affecting peak area precision, including carry-over.
Troubleshooting guide for problems related to system flow, including no flow and fluctuations.
Troubleshooting for pressure-related issues like pulsation or high/low backpressure.
Addresses troubleshooting for variations in retention times.
Troubleshooting for baseline drift, fluctuations, and noise.
Troubleshooting for issues with column compartment and pre-heater temperature.
Troubleshooting for power issues and communication problems with modules.
Information on running diagnostic tests for system modules.
Lists the physical conditions and operating specifications of the Vanquish system.
Provides physical specifications for the solvent rack and system base.
General information about using authorized replacement parts and components.
Lists the items included in the system's ship kit.
Lists optional accessories available for the Vanquish system.
Details consumables and replacement parts, including capillaries and tubing.
Lists specific part numbers for capillaries and tubing.
Provides part numbers for solvent reservoirs and related components.
Provides information on compliance with domestic and international regulations.
Details CE declaration and RoHS compliance of the product.
Information regarding compliance with the Waste Electrical & Electronic Equipment Directive.
Details FCC compliance for the device operating in commercial environments.
To Next Page