Need help?Do you have a question about the Thermo Scientific thermoscientific VF-P10-A-01 and is the answer not in the manual?
General| Product Type | Vacuum Pump |
|---|---|
| Model | VF-P10-A-01 |
| Brand | Thermo Scientific |
| Category | Laboratory Equipment |
| Pump Type | Diaphragm Pump |
| Ultimate Vacuum | 10 mbar |
| Flow Rate | 10 L/min |
| Noise Level | 50 dB |
| Weight | 5 kg |
| Operating Temperature Range | 10 - 40 °C |
| Frequency | 50/60 Hz |
| Relative Humidity Range | 20% to 80% |
| Description | Vacuum pump for laboratory applications |
Describes the manual's purpose, scope, and how to use it effectively for Vanquish devices.
Explains typographical, safety, and notational conventions used throughout the manual for clarity.
Details safety symbols, signal words (DANGER, WARNING, CAUTION), and their meanings for hazard identification.
Outlines general safety information, personnel qualifications, PPE, electrical safety, and residual hazards.
Provides guidelines on compatible solvents, pH ranges, and concentrations to ensure system functionality and safety.
Highlights key features of the Vanquish pumps, including piston design, seal wash, degasser, and mixing systems.
Explains the fundamental operating principles of the serial dual-piston pump with compressibility compensation.
Details the function and flow path of the active piston seal wash system for maintaining piston and seal longevity.
Provides instructions for unpacking the device, inspecting for damage, and safe handling of heavy loads.
Covers crucial safety guidelines for device installation, including handling heavy loads and electrical safety precautions.
Outlines the steps for installing the Vanquish system modules, including hardware setup, flow connections, and software configuration.
Specifies essential requirements for the installation site, including operating environment and power considerations for optimal performance.
Details how to set up flow connections, including general guidelines and specific steps for tubing and capillaries.
Guides on setting up the seal wash system, including choosing liquid, interconnecting paths, and flushing procedures.
Outlines important safety precautions to be observed during the routine operation of the Vanquish device.
Describes the control elements available on the device, including the keypad and status indicators for operational checks.
Provides essential guidelines for using solvents and additives to maintain system performance and prevent contamination.
Explains the process of purging the pump, including settings and alternatives like automatic and manual purging.
Highlights critical safety guidelines for performing maintenance and service procedures to prevent injury and equipment damage.
Outlines a plan for routine and preventive maintenance tasks to ensure optimal device performance and uptime.
Describes procedures related to the pump head, including part overviews, replacement, and cleaning of pistons.
Details a general test procedure to identify and resolve potential leakage issues in the pump system.
Provides guidance on preparing the device for transport or shipping, including safety precautions and packing instructions.
Introduces troubleshooting features like status indicators, pump block LEDs, and alarms for identifying and resolving issues.
Lists common messages that may appear in the Chromeleon Audit Trail, along with their description and remedial actions.
Addresses common pressure-related problems and retention time shifts, guiding users to identify and resolve causes.
Provides specific information on interior components, operating principles, and settings for Quaternary and Dual pumps.
Details interior components, operating principles, dwell volume, and solvent composition settings for the Binary pump.
Explains how to adapt dwell volume and ripple by replacing the mixing system for optimized gradient performance.
Provides considerations for using normal-phase compatible solvents and additives, including modifications and operational advice.
Lists detailed performance specifications for Quaternary, Dual, Binary, and Isocratic pump types.
States that the device must be operated with authorized parts and that part numbers are subject to change.
Lists the contents of the ship kit for various pump models, including tools and consumables.
Details available consumables and replacement parts, including maintenance kits for VC and VF pumps.
Covers declarations of conformity, cTUVus compliance, and RoHS compliance, including relevant logos.
Explains the functionality of digital I/O ports for exchanging signals with external devices and their pin assignments.
To Next Page