What to do if the Thermo Scientific VARIOKLAV 25T Laboratory Equipment displays Error 3 No p.- buildup?
If the Thermo Scientific Laboratory Equipment displays Error 3, it indicates that the door seal cannot build pressure. This could be due to a missing or defective compressor, a missing or interrupted pressure line, or a missing door seal. In this case, it is best to contact after-sales service.
What does Error 12 Water low mean on my Thermo Scientific VARIOKLAV 25T, and how can I fix it?
Error 12 on your Thermo Scientific Laboratory Equipment indicates a 'Water low' issue. This can be caused by an empty feed water tank, defective valves (Y3, Y6.1, Y6.2), or a defective external water supply if you're using one. To resolve this, fill the feed water tank or check the external water supply. If the problem persists, contact after-sales service.
What does Error 4 Seal defective mean for Thermo Scientific VARIOKLAV 25T?
Error 4 indicates a 'Seal defective' issue with the Thermo Scientific Laboratory Equipment. This means the door seal builds pressure but cannot maintain it. Possible causes include a leaking seal, a leaking pressure tank, or a leaking pressure line. It is best to contact after-sales service to have the leaking part replaced.
What does Error 6 Compressor mean on Thermo Scientific VARIOKLAV 25T?
Error 6 indicates a 'Compressor' issue with the Thermo Scientific Laboratory Equipment. This means that the door seal loses pressure during sterilization, which is caused by a defective compressor. It is best to contact after-sales service.
What to do if Thermo Scientific VARIOKLAV 25T Laboratory Equipment shows Error 10 Control error?
If your Thermo Scientific Laboratory Equipment displays Error 10, it indicates an internal program control error. Try turning off and restarting the sterilizer. If the error persists, contact after-sales service.
What does Error 17 Overheating mean on Thermo Scientific VARIOKLAV 25T?
Error 17 indicates an 'Overheating' issue with the Thermo Scientific Laboratory Equipment. This means that the heating system does not turn off, which can be caused by a defective heating system relay or a program control error. It is best to contact after-sales service.
What does Error 2 Lock open mean on Thermo Scientific VARIOKLAV 25T?
Error 2, 'Lock open,' on Thermo Scientific Laboratory Equipment means the locking levers are not reaching their maximum closing positions. Try opening and closing the door. If the issue continues, contact after-sales service.
What to do if Thermo Scientific VARIOKLAV 25T Laboratory Equipment displays Error 22 No heater?
If the Thermo Scientific Laboratory Equipment displays Error 22, it means there is 'No heater'. This is caused by defective heating coils or a defective heating system control. In this case, it is best to contact after-sales service.
What does Error 23 Partial heater mean for Thermo Scientific VARIOKLAV 25T Laboratory Equipment?
Error 23, 'Partial heater,' on Thermo Scientific Laboratory Equipment indicates that one heating coil is defective. It is best to contact after-sales service.
What does Error 20 Microheating mean on Thermo Scientific VARIOKLAV 25T?
Error 20 indicates a 'Microheating' issue with the Thermo Scientific Laboratory Equipment. This means the microheating system (heatable temperature sensor) cannot regulate water feed to the jacket, indicating that the microheating system is defective. It is best to contact after-sales service.
General| Brand | Thermo Scientific |
|---|---|
| Model | VARIOKLAV 25T |
| Category | Laboratory Equipment |
| Language | English |
To Next Page