iCAP 6000 Series ICP-OES Spectrometer Hardware Manual
Page 3 of 51 Version 1.5 – March 2006
2 User Documentation
2.1 Hardware Manual
This manual includes the information required to operate and maintain the iCAP 6000 Series
Spectrometers.
It describes the safety hazards involved in working with the spectrometer and its accessories,
and the means by which such hazards can be minimised.
2.2 Pre-Installation Manual
The manual is included with the Hardware manual, it provides the details of the services and
environment that must be available before an iCAP 6000 ICP-OES can be installed.
2.3 iTEVA Software Manual
This manual is supplied with all instrumentation and describes the functions and features of
the Data Station software, it includes an On-line Help system.
2.4 Data Station On-line Help System
The Data Station On-Line Help describes features and functions of the software.
3 Safety
3.1 iCAP 6000 Safety
Read this page carefully before installing and operating the instrument and its accessories.
The safety standards contained in this manual comply with the requirements of the Health
and Safety at Work Act 1974.
3.1.1 Introduction
The instrument and accessories described in this manual are designed to be used by properly
trained personnel only.
Any adjustment, maintenance and repair of this equipment must only be carried out by
qualified Service Engineers who are aware of the hazards involved.
3.1.2 Safety Precautions
For the correct and safe use of the instrument and its accessories it is essential that the
operating and service personnel follow generally accepted safety procedures in addition to
the specific precautions specified in this manual.
Specific Warning and Caution statements and symbols are included in the relevant sections
of this manual.
Warning and Caution statements and symbols are marked on the apparatus where
appropriate. The symbols are described in the table below:
Yellow/black or Red/white Warning: the operator must
refer to an explanation in the
User Documentation.
White/black/moulded Protective earth (ground)
terminal
Yellow/black Surfaces which may be hot
Yellow/black Hazardous voltages present.
Handle by insulation only. Do
not touch terminal points.
Yellow/black Radio Frequency Radiation,
Specific safety details in user
manuals.
To Next Page
Loading...
