Why is the top segment orange with a water drop lit on my Thermo ONIX CONNECT?
If the top segment is lit in orange along with a lit segment of the water drop on the left, this indicates a fault with the regulation sensor (Outlet tank). The suggested solution is to replace the regulation sensor.
What to do if the top and bottom segments are lit on my Thermo ONIX CONNECT Water Heater?
If the top segment is lit in orange and the bottom segment is also lit, this indicates a communication error with the power board (MCB). First, check the connection to the power board. If the connection is secure, you may need to replace the MCB or contact after-sales service.
General| Brand | Thermo |
|---|---|
| Model | ONIX CONNECT |
| Category | Water Heater |
| Language | English |
Key safety rules for installing the appliance.
Standards and procedures for water connection.
Electrical safety precautions during installation.
Steps for installing the water heater.
Information on product specifications and what's included.
Rules for installing in bathroom zones.
Mounting instructions for vertical models.
Mounting instructions for horizontal models.
Illustrative diagram of connections.
Detailed breakdown of internal parts for different models.
Explanation of the HMI and its operating modes.
Interpretation of status lights on the HMI.
Setting up remote operation via smartphone.
Diagnosing faults using indicator lights.
Solutions for when no indicators are active.
Routine tasks for user maintenance.
Maintenance requiring a qualified person.
Tips for optimal care and use.
Conditions that void the product warranty.
Details on legal and extended warranty coverage.
To Next Page