Life Technologies Holdings Pte Ltd | Block 33 | Marsiling Industrial Estate Road 3 | #07-06, Singapore 739256
For descriptions of symbols on product labels or product documents, go to thermofisher.com/symbols-definition.
The information in this guide is subject to change without notice.
DISCLAIMER: T
O THE EXTENT ALLOWED BY LAW, THERMO FISHER SCIENTIFIC INC. AND/OR ITS AFFILIATE(S) WILL NOT BE
LIABLE FOR SPECIAL, INCIDENTAL, INDIRECT, PUNITIVE, MULTIPLE, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR
ARISING FROM THIS DOCUMENT, INCLUDING YOUR USE OF IT.
Revision history: Pub. No. MAN0018045
Revision Date Description
E.0 27 April 2020 v1.3.0
•
Added pr
otein thermal shift experiments to the instrument functions.
•
Added a 96-well 0.1-mL block.
•
Updated instructions to export data files when setting up a run and added instructions to import or
delete export settings.
•
Updated instructions to save an edited run method.
•
Updated instructions to add or edit reagents and then to apply the reagents to the plate.
•
Updated instructions to view the amplification plot after a run.
•
Added instructions to view QC Check status after the run.
•
Added information about a locked template file.
•
Added functions for using the instrument with the SAE Administrator Console.
D.0 7 January 2020 v1.2.1
•
Added information about position to set up facial authentication and to sign in with facial
authentication.
•
Added instructions to test the connection to the Connect cloud-based platform and to view the
privacy policy for the Connect platform.
•
Added instructions to repair the software after a software update.
•
Changed port 7000 to 7443 for the instrument-to-computer connection.
•
Corrected C
t
to C
q
in description of instrument verification.
C.0 3 December 2019 v1.2.0
•
Added a 384-well plate block.
•
Updated instructions to set up facial authentication.
•
Added a new voice command for calibration.
•
Added custom melt curve run calibration.
•
Added Security, Auditing, and E‑signature (SAE) v2.0 module.
•
Added instructions to generate and reset an access key for external software to connect to the
instrument.
•
Added instructions to import an Assay Information File.
•
Corrected that a Connect profile is required for the instrument schedule and Smart Help.
•
Added new radio compliance standards.
To Next Page