Do not immerse the probe or wire in water.
damp, soapy cloth to Clean.
Use a
Do not use the receiver or transmitter in the rain.
They are not waterproof.
Do not expose the plug of the stainless steel probe
or the plug in hole of the transmitter to water or any
liquid. This will result in a bad connection and faulty
readings.
Keep the stainless steel probe sensor and wire
away from children.
Not Intended for Use by Persons ages 12 and Under.
Clean the stainless steel probe and dry thoroughly
after each and every use.
Cautions:
Always wear a heat resistant glove to touch the
stainless steel probe sensor or wire during or just
after cooking. Do not touch with bare hands.
ENEN
Do not expose the unit to direct heat or surface.
Do not use stainless steel probe in microwave oven.
Always wear a heat resistant glove to touch the
stainless steel probe sensor or wire during or just
after cooking. Do not touch with bare hands.
Keep the stainless steel probe sensor and wire
away from children.
Cleaning
Wash the metal probe tip with hot soapy water and
dry thoroughly. Do not immerse the probe in water
while cleaning.
Wipe the transmitter and receiver with damp cloth.
Do not immerse either in water.
Protect our environment: do not
dispose of electrical equipment in
the domestic waste.
Disposal
Meaning of the “Dustbin” Symbol
Please return any electrical
equipment that you will no longer
Hereby, the manufacturer declares that this product
complies with the basic requirements and applicable
regulations of the EMC Directive 2014/30/EU. The
complete declaration of conformity can be found at:
https://itronicsmall.com/eu-declaration-of-conformity/
Declaration of Conformity
-10-
-11-
To Next Page
Loading...
